P500 SERIES
 
P500 - P500D
P500S - P500SD
Needle beds
cm. 100(40") interchangeable verges
High butt and low butt needles
High butt and low butt needles
Needle jacks to be selected on 4
different working position + out of work
Gauges

gg.9 with needle E7 - gg.12 with needle E8
gg.15 with needle E10 ( on request E8)
gg.18 with needle E12 - gg.21 with needle E12
(on request E14) - gg.24 with needle E14
gg.27 with needle E16 - gg.30 with needle E18

gg.9 con with needle E7 - gg.12 with needle E8
gg.15 with needle E10 ( on request E8)
gg.18 with needle E12
gg.21 with needle E12 (on request E14)
gg.24 with needle E14
N° of systems
1
1
Stitch transfer
From the front to the rear and vice versa (gg.27-30 only from the front to the rear)
Racking
1" towards left and 3/4" towards right max in two times, variable speed
1/2 real - 1/2 for transfer, adjustable
Stitch cams
31 positions with value from 0 to180
Take down
Take down comb - Max. height of the rib 18 cm's ( on request 28 cm's)
Yarn carriers
6 on three double guide bars, having the possibility to produce, in sequence, the ribs in different colors
Yarn cutting
Trapping and cutting device at the right hand side with the cleaning of yarn waste
Rib extraction
Automatic, controlled by A. C. motor
Magazine bars
2 Magazine bars with the possibility of automatic loading two cuff groups on the same bar.
It is possible to utilize the bars of all Cotton frames or linking machines
Doubling (for P500D and P500DSD only)
5x1 in gauges gg.9, gg.12, gg.15, gg.18 - 7x1 in gauges gg.21, gg.24, gg.27, gg.30
(on request 5x1 in gauges gg.21, gg.24)
Tension arms
8 with quick threading and double knot check (up to 12). Magnetic bobbin-board
Carriage traction
Via toothed belt
Main motor
AC servo-motor
Speed
Max 1,6 m./sec - 7 speeds programmable with value from 0 to 63
Automatic cut-off device
Yarn break, fabric press of knots, empty cones, carriage impact, yarn tangle,
full loaded magazine bars, trouble in rib extraction, etc. - Autodiagnosis
Security measures
The machine has been designed, built and marked CE, in compliance with EEc 89/392 rules. Inside lighting
Drive
Floppy disk 3,5" - 1,44 Mb
Monitor
L.C.D., 320x200 pixels with indications in different languages
Electric supply
A. C. 220V 380V, etc. No memory loss in case of power failure
On request
Rib up to 28 cm's - Plating feeders
Weight
Gross 1550 Kg - Net 200 Kg.
Packaging
Length 2520 mm - Height 2020mm - Depth 1030 mm